iDaq4Geo R2 is the new interface entirely developed by TQM Itaca Technology srl in order to manage the dialogue with everything which can be connected to a control station, like probes, laser heads, encoder, operator keypads, pedal for start/stop measure, sensors, input devices, etc …  The system is optimized to manage dynamic controls with the contemporary acquisition of the angular position by means of the encoder and of the dimensional values by means of measuring sensors (contact sensors or not-contact sensors).   The I/O modules guarantee the dialogue with the automatic systems of load and unload, making iDaq4Geo suitable for the management of 100% controls directly in a production line.  

iDaq4Geo R2 has a modular structure and it can integrate the following devices:

  • Power supply module, with output 24 Volt
  • LAN Port 100 Mbit/s
  • CPU with 2 encoder inputs
  • Multi-device synchronization
  • I/O board, up to max 16 In and 16 Out
  • Input for pedal (start/stop measure)
  • 18-bit Analog/Digital Converter
  • Signal conditioners for the connection of HBT probes (Max. 32 probes)

The connection with the PC is made by ethernet 100 Mbit/s with TCP/IP protocol. This fast and safe system solves all the problems of reliability of the connection and of the distance between PC and measuring gauge.

iDaq4Geo R2 is the standard interface for the Itageo 6© stations and for the Itastat 6 Measure stations with high performance.

iDaq4Geo R2 lr

Power Supply

Voltage

Consumption

100-240 V, 50/60 Hz (integrated power supply)

24 VDC

100 W

Power supply module

Output 24 V max 1A

CPU module

Nr. 2 encoder inputs TTL 5 V

Ethernet Port 100 Mbit/s

Multi-rack Sync-in and Sync-out signals

Adjustable (max 25KHz) or triggered by encoder

HBT standard Tesa inputs (max 32 channels)

Gain

x0.5, x1, x5, x10

Voltage inputs (max 32 Inputs)

Range

± 10 V

Input/Output (max 16 In/16 Out)

Peripheral

Voltage

Description

Optoisolated inputs

 

By dry contact

Relays output

24 V

By dry contact NO/NC 1A max

Optoisolated input for pedal

 

By dry contact

Subrack Container 19” 60TE 3U - DIMENSIONS (cm): 36.7 x 40.7 (with handles) h. 19

FaLang translation system by Faboba

This site uses cookies. By closing this banner, scrolling this page or clicking on any element, you accept the use of cookies in accordance with our Policy Read the Privacy policy